|
|
#1
11th December 2007, 06:00 PM
|
|||
|
|||
New Problems
Well now I got a new problem with my Evo. Went to go play it just now and I got a black screen thats the recovery mode. It kept on telling me to hit A to go to the MicroSD card and I did, and it looked for the firmware update and found none. So I put 1.22 on the MicroSD card now and turned it on, got the recovery mode again and I hit A. It found it and now it boots to the Evo and says WARNING: Self Test Failed! Soooooooo any ideas on how to get it working again? Any info from TC would be nice.
Black screen: CycloDS Evolution Recovery Mode HW ver: 1.0 - HW egon: 1 ******* ERROR: Self-tests failed Press A to load from MicroSD So I hit A and I get Loding 'update.evo' verifying integrity... then it brings me to the Evo logo on the top screen and the bottom screen says CycloDS Evolution Updater with a big box that says... ERROR: Self Test failed! Press A to power off your NDS.
__________________
Slot 1: CycloDS Evo $85.00 Slot 2: G6 Lite 4Gb $90.00 M. SD: Kingston 4GB (Japan) $50.00 Getting your hands on your Evo for the first time and finding out it actually dose not work?: PRICELESS Last edited by Ghaleon; 11th December 2007 at 08:24 PM. 
|
|
#2
12th December 2007, 02:12 PM
|
|||
|
|||
|
wow NO ONE posted any info at all >_<
__________________
Slot 1: CycloDS Evo $85.00 Slot 2: G6 Lite 4Gb $90.00 M. SD: Kingston 4GB (Japan) $50.00 Getting your hands on your Evo for the first time and finding out it actually dose not work?: PRICELESS
|
|
#3
12th December 2007, 02:26 PM
|
|||
|
|||
|
i faced this issue two week ago put I got the error message one time and when i hit A every thing is okay. (before hiting A I have ejected the MicroSD the put it again) good luck
__________________
[:::|__|:::] [ + |__| :*] ------------------- NDSL White Cyclo DS Evolution 2Go MMD 4 Go Now Playing : Zelda Phantom Hourglass & Zelda twilight princess
|
|
#4
12th December 2007, 02:26 PM
|
||||
|
||||
|
hmm..
I have absolutely no idea about this. Wait for sometime man.. Someone will definitely post a response  Although have you tried the usual technique of recovery i.e formatting microsd card and dumping back all the files
|
|
#5
12th December 2007, 02:56 PM
|
||||
|
||||
|
have you email Team cyclops? support@teamcyclops.com It's probably a good place to start
|
|
#6
12th December 2007, 06:26 PM
|
||||
|
||||
|
Try redownloading the firmware, or use one on your hard disk that you know works..
If that doesn't help, then you may be out of luck with a defective unit. See the sticky threads in the bugs section for a solution: http://www.teamcyclops.com/forum/showthread.php?t=612 http://www.teamcyclops.com/forum/showthread.php?t=3862
|
|
#10
13th December 2007, 06:08 AM
|
||||
|
||||
|
This problem has been encountered before and reported.
Check the Bug Report section for details on this problem. I think some people resolved it in a different way then "reinserting" the card. But if that works, thats fine too.
__________________
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
